User's Manual

USER MANUAL

Peplink Balance Series

23.4 Email Notification

The Email Notification functionality of Peplink Balance provides a System Administrator with up to date

information on network status.

The settings for configuring Email Notification are found at: System> Email Notification

Email Notification Settings

Email Notification

This setting specifies whether or not to enable Email Notification.

If the box Enable is checked, then the Peplink Balance will sendemail messages to

theSystem Administrators when the WAN status changes, or when new firmware is

available.

If the box Enable is not checked, Email Notification is disabled and the Peplink Balance will

not send email messages.

SMTP Server

This setting specifies the SMTP server to be used for sending email. If the Server requires

authentication, check the box Require authentication.

SSL Encryption

Check the box to enable SMTPS. When the box is checked, the next field SMTP Port will

be changed to 465 automatically.

SMTP Port

This field is for specifying the SMTP Port number.

By default, this is set to 25; when the SSL Encryption box is checked, the default port

number will be set to 465.

You may customize the port number by editing this field. Click the button Default to restore

the number to its default setting.

SMTP User Name /

Password

This setting specifies the SMTP username and password while sending email. These

options are shown only if the Require authentication check box is checked in the SMTP

Server setting.