User's Manual

USER MANUAL

Peplink Balance Series

If LAN/WAN is chosen, the WAN Connection Access Settings form will be displayed.

WAN Connection Access Settings

Allowed Source IP

Subnets

This field allows you to restrict the ability to access web admin toonly defined IP subnets.

 Any - Allow web admin accesses from anywhere, without IP address restrictions.

 Allow access from the following IP subnets only - Restrictsthe ability to access

web admin to only defined IP subnets. When this is chosen, a text input area will

appear beneath:

Enter your allowed IP subnet addresses into this text area. Each IP subnet must be in the

form of w.x.y.z/m. w.x.y.z representsan IP address (e.g. 192.168.0.0), andm represents the

subnet mask in CIDR format, which is between 0 and 32 inclusively. For example:

192.168.0.0/24

To define multiple subnets, separate each IP subnet one in a line. For example:

192.168.0.0/24

10.8.0.0/16

Allowed WAN IP

Address(es)

This is to choose which WAN IP address(es) the web server should listen on.