User's Manual

ManualsBrandsPismo Labs Technology ManualsElectronicsPepwave / Peplink / Pismo Wireless Product

USER MANUAL

Peplink Balance Series

Web Session

Timeout

This field specifies the number of hours and minutes that a web session can remain idle

before the Balance terminatesits access to the Web Admin Interface.

By default, it is set to4 hours.

Authentication by

RADIUS

With this box is checked,the Web Admin will authenticate using an external RADIUS server.

Authenticated users are treated as either "admin" with full read-write permission or “user”

with read-only access.Local "admin" and "user" accounts will be disabled. When the device

is not able to communicate with the external RADIUS server, local accounts will be enabled

again for emergency access.

Additional authentication options will be available once this box is checked.

Auth Protocol

This specifies the authentication protocol used. Available options are MS-CHAP v2 and

PAP.

Auth Server

This specifies the access address of the external RADIUS server.

Auth Server

Secret

This field is meant for the secret key for accessing the RADIUS server.

Auth Timeout

This option specifies the time value for authentication timeout.

Accounting Server

This specifies the access address of the external Accounting server.

Accounting Server

Secret

This field is meant for the secret key for accessing the Accounting server.

Network

Connection

This option is for specifying the network connection to be used for authentication. Users can

choose from LAN, WAN and VPN connections.

CLI SSH &

Console

The CLI (Command Line Interface) can be accessed via SSH. It can also be accessed from

the serial console port for Peplink Balance 305, 380, 580, 710, 1350 and 2500. This field

enables CLI support.

For additional information regarding CLI, please refer to section 22.5 of this manual

CLI SSH Port

This field determines the port on which clients can access CLI SSH

CLI SSH Access

This menu allows you to choose between granting access to LAN and WAN clients, or to

LAN clients only.

Security

This option is for specifying the protocol(s) through which the Web Admin Interface can be

accessible:

 HTTP

 HTTPS

HTTP/HTTPS

Web Admin Port

These fields are for specifying the port number at which the Web Admin Interface can be

accessible.

Web Admin

Access

This option is for specifying the network interfaces through which the Web Admin Interface

can be accessible:

 LAN only

 LAN/WAN