User's Manual

USER MANUAL
Peplink Balance Series
http://www.peplink.com -169 / 227 - Copyright © 2014 Peplink
Operating Schedule
A
These buttons determine the time period at which the AP under this profile will be
activated. Clicking the Custom Schedule option will open the following diagram:
Click the desired time periods to toggle the activation state of AP under this profile.
Max number of
Clients
A
This field determines the maximum clients that can be connected to AP under this profile.
Client Signal
Strength Threshold
A
This field determines that maximum signal strength each individual client will receive.
The measuring unit is Megawatts.
Beacon Rate
A
This drop-down menu provides the option to send beacon in different transmit bit rate
and the bit rates are: 1Mbps, 2Mbps, 5.5Mbps, 6Mbps, 11Mbps.
Beacon Interval
A
This drop-down menu provides the option to set the time between each beacon send.
Available options are: 100ms, 250ms and 500ms.
DTIM
A
This field provides the option to set the frequency for beacon to include Delivery Traffic
Indication Message, DTIM. The interval unit is measured in milliseconds.
RTS Threshold
A
This field provides the option to set the minimum packet size for the unit to send an RTS
using the RTS/CTS handshake. Setting zero would disable this feature.
Slot Time
A
This field provides the option to modify the unit wait time before it transmits. The default
value is 9μs.
ACK Timeout
A
This field provides the option to set the wait time to receive acknowledgement packet
before doing retransmission. The default value is 48μs.
Frame Aggregation
A
With this feature enabled, throughput will be increased by sending two or more data
frames in a single transmission.
Frame Length
This field is only available when Frame Aggregation is enabled. It specifies the frame
length for frame aggregation. By default, it is set as 50000.
A
- Advanced feature, please click the button on the top right hand corner to activate.