User's Manual

USER MANUAL

Peplink Balance Series

Access Control

Restricted Mode

The settings allow administrator to control access using Mac address filtering. Available

options areNone, Deny all except listed, Accept all except listed, and RADIUS MAC

Authentication.

When WPA/WPA2 - Enterprise is configured, RADIUS-based 802.1 x authentication is

enabled. Under this configuration, the Shared Key option should be disabled. When using

this method, select the appropriate version using the V1/V2 controls. The security level of this

method is known to be very high.

When WPA/WPA2- Personal is configured, a Shared Key is used for data encryption and

authentication. When using this configuration, the Shared Key option should be enabled.

Key length must be between eight and 63 characters (inclusive). The security level of this

method is known to be high.

The configuration of static WEP parameters enables pre-shared WEP key encryption.

Authentication is not supported by this method. The security level of this method is known to

be weak.

MAC Address

List

Connection coming from the MAC Addresses in this list will be either denied or accepted

based the option selected in the previous field.

RADIUS Server Settings

Host

Enter the IP address of the primary RADIUS server and, if applicable, the secondary RADIUS

server.

Secret

Enter the RADIUS shared secret for the primary server and, if applicable, the secondary

RADIUS server.

Authentication

Port

In field, enter the UDP authentication port(s) used by your RADIUS server(s) or click the

Default button to enter 1812.

Accounting Port

In field, enter the UDP accounting port(s) used by your RADIUS server(s) or click the Default

button to enter 1813.