User's Manual

USER MANUAL

Peplink Balance Series

20 OSPF & RIPv2

The Balance Router supports OSPF and RIPv2 dynamic routing protocols. Click the Network tab from

the top bar, and click the OSPF & RIPv2 item on the side bar to reach the following menu:

OSPF

Router ID

This field determines the ID of the router. By default, this is specified as the LAN IP

address. If you want to specify your own ID, enter it on the Custom field.

Area

This is an overview of the OSPF areas you have defined. Click on the area name to

configure it. To set a new area, click the button . To delete an

existing area, click the button

OSPF / RIPv2 Settings