User's Manual

USER MANUAL

Peplink Balance Series

18.1.2 Bandwidth Control

(Group Bandwidth Reservation Available on Peplink Balance 305 and 380+)

This section is to define how much minimum bandwidth will be reserved to each user group when a WAN

connection is in full load.When this feature is enabled, a slider with two indicators will be shown. You can

move the indicators to adjust each group's weighting. The lower part of the table shows the corresponding

reserved download and uploads bandwidth value of each connection.

By default, 50% of bandwidth has been reserved for Manager, 30% for Staff, and 20% for Guest.

(Individual Bandwidth Limit Available on Peplink Balance One, 305 and 380+)

You can define a maximum download speed (over all WAN connections) and upload speed (for each

WAN connection) that each individual Staff and Guest member can consume. No limit can be imposed on

individual Managers.

By default, Download and Upload Bandwidth Limits are set to unlimited (set as 0).