User's Manual

USER MANUAL

Peplink Balance Series

16 NAT Mappings

The Peplink Balance allows the IP address mapping of all inbound and outbound NAT’edtraffic to and

from an internal client IP address.

NAT Mappings can be configured at:Network>NAT Mappings

To add a rule for NAT Mappings, clickAdd NAT Ruleand the following screen will be displayed:

NAT Mapping Settings

LAN Client(s)

NAT Mapping rules can be defined for a single LAN IP Address, an IP Range, or an

Network.

Address

This refers to the LAN host’s private IP address.The system maps this address to a

number of public IP addresses (specified below) in order to facilitate inbound and

outbound traffic.

This option is only available when IP Address is selected.

Range

The IP range is a contiguous group of private IP addresses used by the LAN host. The

system maps these addresses to a number of public IP addresses(specified below) to

facilitate outbound traffic.

This option is only available when IP Range is selected.