Manualshelf

User's Manual

ManualsBrandsPismo Labs Technology ManualsElectronicsPepwave / Peplink / Pismo Wireless Product
11121314151617181920
USER MANUAL
Peplink Balance Series
http://www.peplink.com -112 / 227 - Copyright © Peplink
The settings to configure servers on the LAN are located at Network> Inbound Access > Servers.
Inbound connections from the Internet will be forwarded to the specified Inbound IP address(es) based on
the protocol and port number.When more than one server is defined, requests will be distributed to the
servers in the weight ratio specified for each server.
To define a new server, click Add Server, which displays the following screen:
Enter a valid server name and its corresponding LAN IP address.Upon clickingSaveafter entering
required information, the following screen appears.
To define additional servers, click Add Serverand repeat the above steps.