User's Manual

Pepwave Routers User Manual
http://www.pepwave.com
122
Copyright @ 2015 Pepwave
Slot Time
A
This field provides the option to modify the unit wait time before it transmits. The default
value is 9µs.
ACK Timeout
A
This field provides the option to set the wait time to receive acknowledgement packet
before doing retransmission. The default value is 48µs.
Frame
Aggregation
A
With this feature enabled, throughput will be increased by sending two or more data
frames in a single transmission.
A
- Advanced feature. Click the button on the top right-hand corner to activate.
Web Administration Settings
Enable
Check the box to allow the Pepwave router to manage the web admin access information
of the AP.
Web Access
Protocol
These buttons specify the web access protocol used for accessing the web admin of the
AP. The two available options are HTTP and HTTPS.
Management Port
This field specifies the management port used for accessing the device.
HTTP to HTTPS
Redirection
This option will be available if you have chosen HTTPS as the Web Access Protocol.
With this enabled, any HTTP access to the web admin will redirect to HTTPS
automatically.
Admin User
Name
This field specifies the administrator username of the web admin. It is set as admin by
default.
Admin Password
This field allows you to specify a new administrator password. You may also click the
Generate button and let the system generate a random password automatically.