User's Manual

http://www.pepwave.com 6 Copyright @ 2013 Pepwave
4 Installation
Connecting the Network with Pepwave Surf SOHO Router:
4.1 Preparation
Before installing Pepwave Surf SOHO Router, please prepare the following:
 At least one Internet/WAN access account and/or Wi-Fi access information.
 For each network connection,
 Ethernet WAN: A 10/100 BaseT UTP cable with RJ45 connector
 USB: A USB modem
 Wi-Fi WAN: Wi-Fi antennas
 A computer with TCP/IP network protocol and a web browser installed. Supported browsers
include Microsoft Internet Explorer 8.0 or above, Mozilla Firefox 10.0 or above, Apple Safari 5.1
or above, and Google Chrome 18 or above.
4.2 Constructing the Network
At the high level, construct the network according to the following steps:
1. With an Ethernet cable, connect a computer to one of the LAN ports on the Pepwave Surf SOHO.
Repeat with different cables for up to 4 computers to be connected.
2. With another Ethernet cable or a USB modem, connect it to one of the WAN ports on the
Pepwave Surf SOHO. Repeat the same procedure for other WAN ports.
3. Connect the power adapter to the power connector on the rear panel of Pepwave Surf SOHO,
and then plug it into a power outlet.