User's Manual
http://www.pepwave.com
52
Copyright @ 2012 Pepwave
The default value is set to 1 ms.
Slot Time
This field is for specifying the unit wait time before it transmits a packet.
By default, this field is set to 9 µs.
ACK Timeout
This field is for setting the wait time to receive an acknowledgement packet before
performing a retransmission.
By default, this field is set to 48 µs.
Channel Bonding
There are 3 selections available in this setting.
The first is 20 where the channel bonding is off and the channel width is 20 MHz.
If 20/40 is selected, the AP will automatically choose the channel widths between 20
and 40 MHz.
If 40 is chosen, channel bonding will be enforced and, the channel width will just be 40
MHz.
Frame Aggregation
This option allows you to enable frame aggregation to increase transmission
throughput.
Guard Interval
This is where you opt for a short or long guard period interval for your transmissions.
STP Settings
Bridge Priority
This parameter is set to give the likeliness for root switch election.
By default, it is set to 32768.
Ethernet Path Cost
This parameter specifies the preference to provide the best path from the switch to the
root switch.
By default, it is set to 100.
Important Note
Per FCC regulation, the country selection is not available on all models marketed in US. All US models
are fixed to US channel only.