User Manual

USER MANUAL

Peplink Balance Series

Operator

Settings

This setting applies to 3G / EDGE / GPRS modem only. It does not apply to EVDO / EVDO Rev.

A modem.

This allows you to configure the APN settings of your connection. If Auto is selected, Peplink

Balance will automatically detect the APN, configure the modem, and make connection. You

may change the APN settings by selecting Custom Mobile Operator Settings.

The default and recommended Operator Settings is Auto.

The correct values can be obtained from your mobile Internet service provider.

SIM PIN

(Optional)

This is an optional field which is only needed when there is SIM lock for your SIM card service.

DNS Servers

Each ISP may provide a set of DNS servers for DNS lookups. This field specifies the DNS

Servers to be used when a DNS lookup is routed through this connection.

You can input the ISP provided DNS server addresses into the DNS server 1 and DNS server 2

fields. If no address is entered here, this link will not be used for DNS lookups.

This option is enabled automatically and it is required to define the DNS server when GRE is

enabled.

Please refer to Section 11.2, 11.4, 11.5, and 11.6 for details about WAN Health Check, Bandwidth

Allowance Monitor, Additional Public IP Settings, and Dynamic DNS Settings respectively.