User Manual
USER MANUAL
Peplink Balance Series
http://www.peplink.com - 43 / 182 - Copyright © 2011 Peplink
IP Range &
Subnet Mask
This setting allocates a range of IP address that will be assigned to LAN computers
by the DHCP server of Peplink Balance.
Lease Time
This setting specifies the length of time throughout which an IP address of a DHCP
client remains valid. Upon expiration of the Lease Time, the assigned IP address
will no longer be valid and the renewal of the IP address assignment will be
required.
DNS Servers
This option allows you to input the DNS server addresses to be offered to the
DHCP clients. If Assign DNS server automatically is selected, the Peplink
Balance’s built-in DNS server address (i.e. LAN IP address) will be offered.
WINS Server
This option allows you to specify the Windows Internet Name Service (WINS)
server. You may choose to use the built-in WINS server or external WINS servers.
When this unit is Site-to-Site VPN connected, other VPN peers can share this
unit's built-in WINS server by entering this unit's LAN IP address in their DHCP
WINS Servers setting. Therefore, all PC clients in the VPN can resolve the
NetBIOS names of other clients in remote peers.
If you have enabled this option, a list of WINS clients will be displayed at Status >
WINS Clients.
Extended DHCP
Option
In addition to standard DHCP options (e.g. DNS server address, gateway address,
subnet mask), you can specify the value of additional Extended DHCP Options
defined in RFC 2132. In this case, you can pass additional configuration
information to LAN hosts.
To define an Extended DHCP Option, click the Add button, choose the option that
you want to define and enter its value. For values that are in IP address list format,
you can enter one IP address per line in the provided text area input control. Each
option is allowed to be defined once only.
DHCP Reservation
This setting reserves the assignment of fixed IP addresses for a list of computers
on the LAN. The computers to be assigned fixed IP addresses on the LAN are
identified by their MAC addresses.
The fixed IP address assignment is displayed as a cross-reference list between the
computers’ Name, MAC addresses and fixed IP addresses.
The field Name (an optional field) is for you to define a name to represent the
device. MAC addresses should be in the format of 00:AA:BB:CC:DD:EE
Press to create a new record. Press to remove a record.
Reserved clients information can be imported from the Client List, located at Status > Client
List. For more details, please refer to section 20.3
Static Route Settings
Static Route
This table is for defining static routing rules for the LAN segment.
A static route consists of the network address, subnet mask, and gate
way address.
The address and subnet mask values are in the format of w.x.y.z
The local LAN subnet and subnets behind the LAN will be advertised to the
VPN. Remote routes sent over the VPN will also be accepted. Any VPN member
will be able to route to the local subnets.
Press
to create a new route. Press to remove a route.