User Manual

USER MANUAL

Peplink Balance Series

8 Basic Configuration

8.1 Connecting to Web Admin Interface

1. Start a web browser on a computer that is connected with Peplink Balance through LAN.

2. To connect to Web Admin of Peplink Balance, enter the following LAN IP address in the address

field of the web browser:

http://192.168.1.1

(This is the default LAN IP address of Peplink Balance.)

3. Enter the following to access the Web Admin

Interface.

User Name: admin

Password: admin

(This is the default Admin User login of

Peplink Balance. The Admin and Read-only

User Password can be changed at System >

Admin Security of the Web Admin Interface.)

4. After successful login, the Dashboard of Web Admin Interface will be displayed. It looks similar

to the following:

Important Note

The Save button causes the changes to be saved. Configuration changes (e.g. WAN, LAN, Admin

settings, etc.) take effect after clicking the Apply Changes button on each page’s top right hand corner.