User Manual
USER MANUAL
Peplink Balance Series
http://www.peplink.com - 122 / 182 - Copyright © 2011 Peplink
17.2 Bandwidth Control
(Available on Peplink Balance 380+)
This section is to define how much minimum bandwidth will be reserved to each user group when a WAN
connection is in full load. When this feature is enabled, a slider with two indicators will be shown. You
can move the indicators to adjust each group's weighting. The lower part of the table shows the
corresponding reserved download and upload bandwidth value of each connection.
By default, 50% of bandwidth has been reserved for Manager, 30% for Staff, and 20% for Guest.
You can define a maximum download speed (over all WAN connections) and upload speed (for each
WAN connection) that each individual Staff and Guest member can consume. No limit can be imposed on
individual Manager members.
By default, Download and Upload Bandwidth Limits are set to unlimited (set as 0).