User Manual

USER MANUAL

Peplink Balance Series

16.4 Captive Portal Management

A customized Captive Portal page can be configured and applied to wireless networks. To configure,

check the box at the bottom to enable the feature. Once enabled, a link for configuring Captive Portal will

be available as shown below.

Click the link configure your Captive Portal to start configuration. Once the configuration is complete,

click the button Save to save settings.

Important Note

Only one portal page customization is available for each Peplink Balance device, multiple wireless networks with

captive portal enabled will be redirected to the same portal page.

16.4.1 General

Captive Portal Settings

Captive Portal Mode

This is to specify the wireless network can be accessed by the general public or

an access account is required.

If Guess Account mode is selected, an access account is required. If Open

Access mode is selected,

users can associated with this network to gain

access to the Internet without account information, a splash screen wil

l be

shown.

Free Access Quota

This option is only available if Open Access mode

is selected, which specify

the length of the free access to the general public users without access

accounts. The number “0” mean the access is unlimited. The unit used is mins.

Daily Rollover Time

This option is only available if Open Access mode is s

elected, which specify

the daily rollover time of the free access period. All access quota will be reset at

this time specified.