User Manual

USER MANUAL

Peplink Balance Series

16.3 Wireless Networks

Wireless Network settings, including the name of network (SSID) and security policy, can be defined and

managed in this section. After defining a wireless network, users can choose the network in AP Profiles.

Click the button New Network to create a new Network profile, or click the existing network profile to

modify its settings.

Wireless Network Settings

Network Name

(SSID)

This setting specifies the SSID of the virtual AP to be scanned by Wi-Fi clients.

VLAN ID

This setting specifies the VLAN ID to be tagged on all outgoing packets generated

from this wireless network (i.e. packets that travel from the Wi-Fi segment, through

the Pepwave AP One unit to Ethernet segment via the LAN port).

The default value of this setting is 0. That means VLAN tagging is disabled (instead

of tagged with zero).

Broadcast SSID

This setting specifies whether or not the SSID of this wireless network can be

scanned by Wi-Fi clients.

Broadcast SSID is enabled by default.

Multicast Filter

This setting enables the filtering of multicast network traffic to the wireless SSID.