User's Manual

http://www.pepwave.com

IPsec VPN Settings

Name

This field is for specifying a local name to represent this connection profile.

Active

When this box is checked, this IPsec VPN connection profile will be enabled. Otherwise, it

will be disabled.

Remote Gateway

IP Address

Enter the remote peer’s public IP address.For Aggressive Mode, this is optional..

Local Networks

Enter the local LAN subnets here. If you have defined “static routes”, they will be shown

here too.

Remote Networks

Enter the LAN and subnets that are located at the remote site here.

Main Mode

Choose this Main Mode if both IPsec peers use static IP addresses.

Aggressive Mode

Choose this Aggressive Mode if one of the IPsec peers use dynamic IP addresses.

Force UDP

Encapsulation

For UDP encapsulation to be forced regardless of the NAT-Traversal, tick this checkbox.

Pre-shared Key

This defines the peer authentication pre-shared key to be used to authenticate this VPN