User's Manual

http://www.pepwave.com
7
Copyright @ 2014 Pepwave
3 Product Features
PepwaveMAX enables all LAN users to share broadband Internet connections, and provide advanced
features to enhance Internet access. The following is the list of supported features on Pepwave MAX
Mobile Router:
3.1 Supported Network Features
3.1.1 WAN
 Ethernet WAN Connection in Full/Half Duplex
 Static IP support for PPPoE
 Built-in HSPA and EVDO cellular modems (Available on Pepwave MAX HD2 and HD2 IP67)
 USB mobile connection(s)
 Wi-Fi WAN connection
 Network address translation (NAT)/ port address translation (PAT)
 Inbound and outbound NATmapping
 IPsec NAT-T and PPTP packet passthrough
 MAC address clone and passthrough
 Customizable MTU and MSS values
 WAN connection health check
 Dynamic DNS (supportedservice providers: changeip.com, dyndns.org, no-ip.org, tzo.com and
DNS-O-Matic)
 Ping, DNS lookup and HTTP based health check
3.1.2 LAN
 Wi-Fi AP
 Ethernet LAN ports
 DHCP server on LAN
 Extended DHCP option support
 Static routing rules
 VLAN on LAN support
3.1.3 VPN
 SpeedFusion
TM
 SpeedFusion performance analyzer
 X.509 certificate support (supported forMAX 700, and MAX HD2, available on the Max BR1
and MAX_OTG_U4_SF as an activated feature)
 VPN load balancing and failover among selected WAN connections
 Bandwidth bonding & failover among selected WAN connections
 IPsec VPN for Network-to-Network connection (Works with Cisco, Juniper only)
 Ability to route Internet traffic to a remote VPN peer
 Optional pre-shared key setting
 SpeedFusion
TM
throughput, ping and traceroute tests
 PPTP server