User's Manual

http://www.pepwave.com
63
Copyright @ 2014 Pepwave
to create a new VPN profile.Each profile is for making VPN connection
with one remote Peplink Balance/Pepwave MAX. Once you click on New Profile button this will open a
window:
PepVPN Profile
Active
Check this box to enable VPN functionality.
Encryption
By default, VPN traffic is encrypted with 256-bit AES standard. If the option Off is selected
on both sides of a VPN connection, no encryption will be applied.
Remote ID
The Pepwave MAX establishes VPN connection with a remote peer that has a serial
numberor a remote ID here.
Authentication
Select from By Remote ID Only, Preshared Key, or X.509 to specify the method the
Pepwave MAX will use to authenticate peers. When selecting By Remote ID Only, be sure
to enter a unique peer ID number in the Remote ID field.
Remote ID:
To allow the Pepwave MAXto establisha VPN connection with a specific remote peer using
a unique identifying number.
Preshared Key:
Pre-shared Key defines the pre-shared key used for this particular VPN connection. The
connection will be up only if the pre-shared keys on each side match.When the peer is
running firmware 5.0+, this setting will be ignored. If you would like to prevent the display of
the pre-shared key, check Hide Characters.