User's Manual

http://www.pepwave.com

WAN Port – 2

Standby State

This setting specifies the state of the WAN connection. The available options are Remain

connected and Disconnect.

The default state is Remain Connected.

Upstream

Bandwidth

This setting specifies the data bandwidth in the outbound direction from the LAN through the

WAN interface.

Downstream

Bandwidth

This setting specifies the data bandwidth in the inbound direction from the WAN interface to the

LAN.

This value is referenced as the default weight value when using the algorithm Least Used, or the

algorithm Persistence (Auto) in Outbound Policy with Managed by Custom Rules chosen (see

Section 13.2).

Health Check

Method

This setting specifies the health check method for the WAN connection. The value of method can

be configured as Disabled, Ping or DNS Lookup.

The default method is Disabled.

See Section9.4 for configuration details.

Dynamic DNS

Service

Provider

This setting specifies the dynamic DNS service provider to be used for the WAN based on

supported dynamic DNS service providers:

 changeip.com

 dyndns.org

 no-ip.org

 tzo.com

 DNS-O-Matic

Select Disabled to disable this feature.

See Section 1.1 for configuration details.