User's Manual

http://www.pepwave.com

6 Configuration of WAN Interface(s)

6.1 Mounting the Unit

6.1.1 Wall Mount

The Pepwave MAX 700/HD2/On-The-Go can be mounted on the wall by screwing. After adding the screw

on the wall, slide the MAX in the screw whole socket as indicated below.Recommeneded Screw

Specification: M3.5 x 20mm, Head Diameter 6mm, Head Thickness 2.4mm

The Pepwave MAX BR1 can be mountedby screwing the four holes on the device to the wall.

6.1.2 Car Mount

The Pepwave MAX700/HD2 can be mounted in a vehicle using the included mounting brackets. Place the

mounting brackets by the two sides, and screw it onto the device.

7 Connecting to Web Admin Interface

1. Start a Web browser on a computer that is connected with the Pepwave MAX through LAN.

2. To connect to Web Admin Interface of the Pepwave MAX, enter the following LAN IP address in the

address field of the web browser:

http://192.168.50.1