User's Manual

http://www.pepwave.com

5.3 Configuring the Network Environment

To ensure that the Pepwave MAX works properly in the LAN environment and can access the Internet via

the WAN connections, please refer to the following setup procedures:

 LAN Configuration

For basic configuration, refer to Section6,Connecting to Web Admin Interface.

For advanced configuration, go to Section7, Configuration of LAN Interface(s).

 WAN Configuration

For basic configuration, refer to Section6, Connecting to Web Admin Interface.

For advanced configuration, go to Section 7.2,Captive Portal

 The Captive Portal serves as gateway that clients have to pass if they wish to access the internet

using your router. To configure, navigate to Network >Captive Portal to see the following screen:

Captive Portal Settings

Apply On

Clicking the edit button trigger a dialogue where you can choose which LAN / VLAN to

apply your captive portal.

Click all LAN / VLAN that you wish to apply the captive portal to.

Access Mode

Click Open Access to allow clients to freely access your router. Click User

Authentication to force your clients to authenticate before accessing your router.