User's Manual

http://www.pepwave.com
124
Copyright @ 2014 Pepwave
21.6 SNMP
SNMPor Simple Network Management Protocol is an open standard that can be used to collect
information from the Pepwave MAX Mobile Router.
SNMP configuration is located atSystem> SNMP:
SNMP Settings
SNMP Device
Name
This field shows the router name defined in System > Admin Security.
SNMP Port
This option specifies the port which SNMP used. The default port is set as 161.
SNMPv1
This option allows you to enable SNMP version 1.
SNMPv2
This option allows you to enable SNMP version 2.
SNMPv3
This option allows you to enable SNMP version 3.
To add a community for either SNMPv1 or SNMPv2, click the Add SNMP Communitybutton in the
Community Name table, upon which the following screen will be displayed: