User's Manual

User Manual
http://www.pepwave.com
59
Copyright © 2/26/13 Pepwave
7.7.3 SNMPv3 Users
By adding SNMPv3 users, access rights can be controlled. Click New to add a new SNMPv3
user, or click Edit to change the settings of an existing user. Click Remove to delete an
SNMPv3 user.
SNMPv3 User - Settings
SNMPv3 User Name
User ID allowed to access the SNMP agent.
Authentication
Protocol
Protocol for authenticating the user. Choose HMAC-MD5 or HMAC-SHA.
Authentication
Password
Users provided with a correct password will be granted the right to access
the SNMP agent.
Privacy Protocol
Encryption method to be used in SNMPv3 communication. Choose None
or CBC-DES.
Privacy Password
Shown only if CBC-DES is chosen as the Privacy Protocol. This is the
key for decrypting encrypted data.
Access Mode
Grant Read or Read & Write access to this user.
Status
Enable or Disable this user.