User's Manual

User Manual
http://www.pepwave.com
11
Copyright © 2/26/13 Pepwave
4.4 AP One X
Front View Rear Panel View
Connectors
WAN
10/100BaseT Power over Ethernet 802.3af connector, normally connected
to a back haul network.
Reset
Inset reset button. Depress with a pin and hold for at least five seconds to
restore factory defaults. For further details, please refer to Restoring
Factory Defaults.
Antenna
(Right Connector)
Female N-type connector for attaching the antenna.
PWR
OFF Power is off.
ON Power is on.
LAN
OFF Ethernet port is not connected.
ON Ethernet port is connected.
Wi-Fi
OFF Wi-Fi is not ready.
ON Wi-Fi is ready.
OFF No client is associated.
ON Clients are associated.
Each light indicates an increase of up to 10 connected clients. The first light
(MIN) indicates from one to 10 clients, while the last (MAX) indicates 41 or
more clients.