User's Manual

Table Of Contents

User Manual

Pepwave AP Pro

http://www.pepwave.com

2011 Pepwave

5 Installation

5.1 Installation Procedures

1. Attach the antenna to the Pepwave AP Pro unit.

2. Connect the Ethernet port on the unit with the backbone network using an Ethernet cable. The

port could auto sense the cable is straight-through or cross-over.

3. Connect the power adapter to the power connector of the unit, and then plug in the power adapter.

4. Wait for the status LED to turn green.

5. Connect a PC to the backbone network, and configure the IP address of the PC to be any IP

address between 192.168.0.4 and 192.168.0.254, with subnet mask of 255.255.255.0.

6. With Microsoft Internet Explorer 6 or above, or Mozilla Firefox 2.0 or above, or Google Chrome

2.0 or above, connect to the URL

https://192.168.0.3

7. Enter the default admin login ID and password, admin and public respectively.

8. After logging in, the following Information main page appears. Please go to Configure > System

to facilitate further configuration of the Pepwave AP Pro unit.