User's Manual

User Manual
Pepwave AP Pro
http://www.pepwave.com
6
Copyright ©
2011 Pepwave
4 Pepwave AP Pro Overview
4.1 AP Pro
Front View
Connectors
Antenna
(Left-most
Connector)
A RP-SMA connector for connecting the antenna.
WAN
A 10/100BaseT Ethernet connector, normally to be connected to back haul
network.
Reset
A reset button to be depressed with a pin. Depress and hold for at least 5
seconds to restore factory defaults.
For further details, please refer to Section 10, Restoration of Factory Defaults.
Power Connector
A connector for DC 12V power input, to be connected with the supplied power
adaptor.
LED Indicators
Power
OFF – Power off
ON – Power on
Status
OFF – The unit is initializing.
ON – The unit is ready.
Ethernet
OFF – The Ethernet port is not connected.
ON – The Ethernet port is connected.
Wireless
OFF – Wireless is not ready.
On – Wireless is ready.