User's Manual

User Manual
Pepwave AP Pro
http://www.pepwave.com
23
Copyright ©
2011 Pepwave
7.5.2 SNMPv1 / SNMPv2 Communities
By adding SNMPv1/v2 Communities, access rights can be controlled. Click on the New button to add one.
SNMPv1 / SNMPv2 Communities
Community Name The password for getting or setting SNMP values.
IP Address and IP
Mask
The allowed IP and subnet address which can access the SNMP server.
Access Mode Choose either Read Only or Read & Write.
Status Enable or Disable this community.
7.5.3 SNMPv3 Users
By adding SNMPv3 users, access rights can be controlled. Click on the New button to add
one.
SNMPv3 User Setting
SNMPv3 User Name
The user ID to be allowed to access the SNMP agent.
Authentication
Protocol
The protocol for authenticating the user. Available options are: HMAC-MD5
and HMAC-SHA.
Authentication
Password
Users provided with a correct password will be granted the right to access the
SNMP agent.
Privacy Protocol
The encryption method to be used in SNMPv3 communication. Available
options are: None and CBC-DES.
Privacy Password
This option is shown only if CBC-DES is chosen as the Privacy Protocol. This
is the key for decrypting the encrypted data.
Access Mode Grant Read or Read & Write access to this user.
Status Enable or Disable this user.