User's Manual

User Manual
Pepwave AP Pro
http://www.pepwave.com
20
Copyright ©
2011 Pepwave
7.3 Advanced Wireless Settings
Advanced Wireless Settings provides more options to fine tune the parameters on the system to achieve
the optimal performance.
7.3.1 Radio Settings
Radio Settings
Protocol
Five options are available:
802.11abgn: Pepwave AP Pro accepts 802.11b, 802.11g and 802.11n client
association requests.
802.11b/g: Pepwave AP Pro accepts both 802.11b and 802.11g client association
requests.
802.11a Only: Pepwave AP Pro accepts only 802.11a client association requests.
802.11b Only: Pepwave AP Pro accepts only 802.11b client association requests.
802.11g Only: Pepwave AP Pro accepts only 802.11g client association requests.
802.11n Only: Pepwave AP Pro accepts only 802.11n client association requests.
Operating
Country
This setting specifies the country / region regulations which Pepwave AP Pro unit
should follow.
If North America region is selected, RF channels 1 to 11 are available. Maximum
transmission power is 26 dBm (400 mW).
If Europe region is selected, RF channels 1 to 13 are available. Maximum
transmission power is 20 dBm (100 mW).
Note: User is required to select the appropriate option based on their local laws and
regulations.
Channel
Bonding
This option will only be available when the above Protocol is set as 802.11abgn or
802.11n Only. The three options are 20MHz, 20/40MHz and 40MHz.
Channel
This option selects the 802.11 channel to be utilized. Available options are from 1 to
11, and from 1 to 13 for the country setting of North America region and Europe
region, respectively. (Channel 14 is only available when the country is selected as
Japan with protocol 802.11b.)
If Auto is set, the system would perform channel scanning based on the scheduled
time set and choose the most suitable channel automatically.
Power Boost
This option enables the power boost feature, which maximum the Wi-Fi capacity of
the device. Please enable only if the local regulation allow to do so.
Tx Output
Power
This option enables the configuration of transmission power.
Available options are Max, High, Medium, and Low.
7.3.2 Advanced Features
Advanced Wireless Settings – Advanced Features
Discover Nearby
Network
The AP would scan and discover nearby network if this option is enabled.
Scanning Interval
This setting determines how often the access point goes to other channels to
discover Neighbor AP.