User's Manual

User Manual
Pepwave AP Pro
http://www.pepwave.com
18
Copyright ©
2011 Pepwave
7.2.3 Guest Protect
Wireless Networks Details - Guest Protect
Block LAN
Access
This option enables the settings to Block all private IPs / Custom Subnet /
Block Exception.
If you have selected Block all private IPs or Custom Subnet, these IPs /
Subnets will be blocked no matter what "Firewall Mode" selected. When Block
Exception is selected, IPs entered will be excluded from the blocking list.
1. Private IP -- This includes the commonly known private IPs:
• 192.168.0.0 - 192.168.255.255
• 172.16.0.0 - 172.31.255.255
• 10.0.0.0 - 10.255.255.255
2. Custom Subnet -- This includes user specified IP subnets to be blocked.
3. Block Exception – Only IPs specified will NOT be blocked.
Bandwidth
Management
This option enables the settings to control upstream and downstream limits. You
can select to either control the bandwidth usage Per VAP or Per Client.
Maximum Number
of Clients
This setting specifies the maximum number of clients that can be connected to
the AP Pro simultaneously. By default, it is set to 0: unlimited.
Firewall Mode
This setting specifies three options: Lockdown, Flexible, and Disable.
• Lockdown – Block all traffic except for the pre-defined exceptions;
• Flexible – Allow all traffic except for the pre-defined exceptions;
• Disable – Firewall mode is disabled. (Default option)
Exceptions
This setting specifies the exceptions when Lockdown or Flexible Firewall Mode
is selected. Exceptions can be added by types, including Port, Domain, IP
Address, MAC Address, Application/Service.