User's Manual

User Manual
Pepwave AP Pro
http://www.pepwave.com
14
Copyright ©
2011 Pepwave
MAC Address
(BSSID)
Shows the detailed BSSIDs.
Portal
Shows if the InControl Guest Portal is enabled. Please refer to section 7.2.2 for
details.
Click on the Info link to check the following networking statistics: Broadcast SSID, MAC Filter,
Bandwidth Control, Layer 2 Isolation.
General Wireless Networks Settings – Info
Broadcast SSID
This shows if the Broadcast SSID feature of this network is enabled.
MAC Filter
This shows if the MAC Filter feature of this network is enabled.
Bandwidth Control
This shows if the Bandwidth Control feature of this network is enabled.
Layer 2 Isolation
This shows if the Layer 2 Isolation feature of this network is enabled.
To add a new virtual AP, click the Add button. To modify the settings for a virtual AP, click the link Edit on
the right of the desired WLAN SSID, upon which the following Wireless Network Details is displayed.
7.2.1 Wireless Network Details - Basic
Wireless Networks Details - Basic
Enable
Select Yes to enable the virtual AP, or No to disable the virtual AP.
By default, the virtual AP is enabled.
Wireless Network
SSID
This setting specifies the SSID of the virtual AP to be scanned by Wi-Fi clients.
Broadcast SSID
This setting specifies whether or not the ESSID of the virtual AP can be
scanned by Wi-Fi clients.
Note that the BSSID (i.e. the MAC address of the virtual AP) cannot be hidden
from the scan. To associate with the virtual AP, clients must specify the correct
ESSID upon association.
Broadcast SSID is enabled by default.
Security Level
This setting configures the wireless authentication and encryption methods.
Available options are: Open - No Encryption, Static WEP, 802.1X, WPA-
TKIP and WPA2-AES:CCMP.
Selecting Open - No Encryption disables encryption.
For details on the other options, please refer to:
7.2.1.1 - Static WEP Parameters
7.2.1.2 - 802.1x Parameters
7.2.1.3 - WPA Parameters