User's Manual

User Manual
Pepwave AP Pro
http://www.pepwave.com
12
Copyright ©
2011 Pepwave
7.1.2 Advanced
System Settings - Advanced
Management VLAN
ID
This specifies the VLAN from which management sessions are allowed. The
establishment of management sessions is restricted only to the specified VLAN
ID. If Management VLAN ID is set to zero, no VLAN restriction is applied.
The default value of this setting is zero. It means no tagging is enabled
(instead of tagged with zero).
NTP Server
This is the Network Time Protocol (NTP) Server hostname to be used for
synchronizing system clock of Pepwave AP Pro.
The default value of this setting is pool.ntp.org.
Scheduled Reboot
The system would perform reboot based on the scheduled time set. Click the
box above the Schedule to Enable this feature.
Ethernet
Speed/Duplex
This setting provides the option to set the speed of the Ethernet.
Controller IP
Address / Domain
Name
This is an optional field which specifies the IP address or domain name of the
Peplink Balance AP Controller.
AP Mode
Available options are Bridge and Router. With this option set as Router, the
following Manual Router Settings will be available.