User Manual

Pepwave Surf / Surf AP / Surf DX Series
- 5 - Copyright © 2011 Pepwave
Pepwave User Manual
3.2 Hardware Setup
3.2.1 Surf mini
1. Attach the provided antenna to the right most antenna connector
2. Connect the LAN port to the computer’s Ethernet port with an Ethernet cable.
3. Connect the end of the included power adapter to the power socket on Pepwave Surf
mini.
4. Switch on the power adaptor.
3.2.2 Surf 400
1. Attach the provided antenna to the right most antenna connector
2. Connect the LAN port to the computer’s Ethernet port with an Ethernet cable.
3. Connect the end of the included power adapter to the power socket on Pepwave Surf
400.
4. Optionally, connect a 3G USB Modem to the USB Port.
5. Switch on the power adaptor.
3.2.3 Surf DX Series
Please follow the installation guide to set up the Pepwave Surf 400-DX.