User's Manual

User Manual
http://www.pepwave.com
17
Copyright ©
2011
Pepwave
7.2.1 Wireless Network Details - Basic
Wireless Networks Details - Basic
Enable
Select Yes to enable the virtual AP, or No to disable the virtual AP.
By default, the virtual AP is enabled.
Wireless Network
SSID
This setting specifies the SSID of the virtual AP to be scanned by Wi-Fi clients.
Broadcast SSID
This setting specifies whether or not the ESSID of the virtual AP can be
scanned by Wi-Fi clients.
Note that the BSSID (i.e. the MAC address of the virtual AP) cannot be hidden
from the scan. To associate with the virtual AP, clients must specify the correct
ESSID upon association.
Broadcast SSID is enabled by default.
Security Level
This setting configures the wireless authentication and encryption methods.
Available options are: Open - No Encryption, Static WEP, 802.1X, WPA-
TKIP and WPA2-AES:CCMP.
Selecting Open - No Encryption disables encryption.
For details on the other options, please refer to:
7.2.1.1 - Static WEP Parameters
7.2.1.2 - 802.1x Parameters
7.2.1.3 - WPA Parameters