User's Manual

User Manual
http://www.pepwave.com
13
Copyright ©
2011
Pepwave
7 Configuration
7.1 System
Upon selecting System under Configure section from the navigation bar on the left, the following page
shows the configuration options:
7.1.1 Basic
System Settings - Basic
AP Name
A user-specified name for this access point.
This value can be retrieved via SNMP.
Location
A user-specified name for the location of the access point.
This value can be retrieved via SNMP.
Timezone
This option specifies the time region to be used for representing the time on
the system.
Domain Name
Domain name can be set for wireless clients to have a readable name for the
web management.
Keep Default IP With this option disabled, default IP 192.168.0.3 of the device will be disabled.
IP Address Mode
The options are Automatic and Manual.
Automatic: IP address of the Pepwave AP One unit is acquired from a DHCP
server on the Ethernet segment.
Manual: A user-specified IP address is used.
IP Address Mode – Manual
Static IP Address
This specifies the unique IP address for the Pepwave AP One unit to
communicate on the Ethernet segment.
This IP address is distinct from the admin IP address 192.168.0.3 on the
Ethernet segment.