User's Manual

Table Of Contents

User Manual

Pepwave PolePoint Series

3.2 Hardware Setup

3.2.1 Surf mini / Surf On-The-Go Series

1. Attach the provided antenna to the right most antenna connector

2. Connect the LAN port to the computer’s Ethernet port with an Ethernet cable.

3. Connect the end of the included power adapter to the power socket on Pepwave Surf mini.

4. Power on the power adaptor.

3.2.2 Surf 400 Series

1. Attach the provided antenna to the left most antenna connector

2. Connect the LAN port to the computer’s Ethernet port with an Ethernet cable.

3. Connect the end of the included power adapter to the power socket (labeled “DC 12V”) on

Pepwave Surf.

4. Power on the power adaptor.

3.2.3 Surf DX Series

Please follow the installation guide to set up the Pepwave Surf 400-DX.