User's Manual
Table Of Contents
- User Manual
- Table of Contents
- 1 Copyright
- 2 Disclaimer
- 3 Product Description
- 4 Using the Pepwave Devices
- 5 CPE Settings Details
- 6 Port Forwarding
- 7 QoS
- 8 Firmware Upgrade
- 9 Debug and System information
- 10 Restore to Default Settings
- Appendix
- Table of Contents
http://www.pepwave.com 26 Copyright © 2011 Pepwave
User Manual
Pepwave PolePoint Series
7 QoS
QoS Settings
Target
To choose whether it is an incoming (Source) or outgoing (Destination) traffic
that should be controlled by the service.
Service Port Range
Enter a port or a range of ports that would like to be controlled by the service.
Protocol
The Protocol for the above port(s). You should select at least one protocol
between TCP and UDP.
IP Address
The IP address that you would like the traffics to be controlled by the service.
Priority
There are three choices for service priority: Background, Video and Voice. By
choosing Default, priority will be automatically adjusted.
Del
By clicking the button, you can delete the corresponding rows of port forwarding
rules.
Illustration 15: QoS