User's Manual
Table Of Contents
- User Manual
- Table of Contents
- 1 Copyright
- 2 Disclaimer
- 3 Product Description
- 4 Using the Pepwave Devices
- 5 CPE Settings Details
- 6 Port Forwarding
- 7 QoS
- 8 Firmware Upgrade
- 9 Debug and System information
- 10 Restore to Default Settings
- Appendix
- Table of Contents
http://www.pepwave.com 23 Copyright © 2011 Pepwave
User Manual
Pepwave PolePoint Series
5.7.4 Access Point Configure Automatically
Illustration 13: Access Point Configure Automatically
With the Access Point Configuration set to Configure Automatically, the SSID, Authentication, and
Encryption Key values of the Integrated Wi-Fi Access Point will be configured to be the same as in the
Wireless IP Settings section.
Important Note
In the Wireless Settings section, if Authentication is set to either 802.1x with dynamic WEP key or
WPA/WPA2-Enterprise, then the Configure Automatically option of the Access Point Configuration
becomes unavailable, because the Integrated Wi-Fi Access Point functionality currently does not
support authentication via the 802.1x with dynamic WEP key and WPA/WPA2-Enterprise methods.