User's Manual
Table Of Contents
- User Manual
- Table of Contents
- 1 Copyright
- 2 Disclaimer
- 3 Product Description
- 4 Using the Pepwave Devices
- 5 CPE Settings Details
- 6 Port Forwarding
- 7 QoS
- 8 Firmware Upgrade
- 9 Debug and System information
- 10 Restore to Default Settings
- Appendix
- Table of Contents
http://www.pepwave.com 22 Copyright © 2011 Pepwave
User Manual
Pepwave PolePoint Series
5.7.2 Access Point Disabled
Access Point feature will be disabled when Disable is selected.
Illustration 11: Access Point Disabled
5.7.3 Access Point configure Manually
Illustration 12: Access Point Configure Manually
Configure Manually
AP SSID
In Manual Configuration mode, the SSID is manually entered.
Authentication
It can be one of three configurable values:
• Open
No Encryption Key is necessary.
• Static WEP Key
A 64- or 128-bit Encryption Key is required, and can be entered in either
an ASCII or HEX representation.
• WPA/WPA2-Personal
An Encryption Key, of at least 8 characters, is required.