User's Manual
Table Of Contents
- User Manual
- Table of Contents
- 1 Copyright
- 2 Disclaimer
- 3 Product Description
- 4 Using the Pepwave Devices
- 5 CPE Settings Details
- 6 Port Forwarding
- 7 QoS
- 8 Firmware Upgrade
- 9 Debug and System information
- 10 Restore to Default Settings
- Appendix
- Table of Contents
http://www.pepwave.com 19 Copyright © 2011 Pepwave
User Manual
Pepwave PolePoint Series
5.5 Wireless IP Settings
Illustration 9: Wireless IP Settings
Wireless IP Settings
IP Settings
The IP address can be obtained automatically or configured manually. If you
choose to manually configure the IP address for your unit, enter the fields IP
Address, Subnet Mask, Default Gateway, Preferred DNS Server and Alternate
DNS Server.
Select Obtain an IP Address using DHCP and the device will obtain an IP
from the DHCP server automatically.
Or select Obtain an IP Address using PPPOE and enter the fields for PPPOE
connection.
AP Settings
The AP Settings will be covered in detail in the subsequent section Integrated
Wi-Fi Access Point Configuration.