User's Manual

Table Of Contents

User Manual

Pepwave PolePoint Series

5.2 Radio Settings

Illustration 6: Radio Settings

Radio Settings

Radio Mode

It allows the user to choose between radio modulations support: 802.11na, 802.11ng,

802.11b/g, 802.11b only, etc. The available settings depend on the Wi-Fi module

installed on the device.

Channel Width

This option will only be available if you have selected 802.11na or 802.11ng in the

previous field. There are two options can be chosen: 20MHz, 20/40MHz

Country

Select a country location where you are using the device. Available channels and

output power would be adjusted accordingly.

Note: The country code selection is for non-US model only and is not available

to all US model. Per FCC regulation, all WiFi product marketed in US must fixed

to US operation channels only.

Channel

Scanning

Mode

To select different channels that preferred to scan. If Single is selected, the option

Scanned Channel would be shown.

Bit Rate

Available options depend on the Radio Mode chosen. If auto is chosen, the device will

choose the best bit rate dynamically and automatically.