User's Manual
Table Of Contents
- User Manual
- Table of Contents
- 1 Copyright
- 2 Disclaimer
- 3 Product Description
- 4 Using the Pepwave Devices
- 5 CPE Settings Details
- 6 Port Forwarding
- 7 QoS
- 8 Firmware Upgrade
- 9 Debug and System information
- 10 Restore to Default Settings
- Appendix
- Table of Contents
http://www.pepwave.com 14 Copyright © 2011 Pepwave
User Manual
Pepwave PolePoint Series
5 CPE Settings Details
5.1 IP Settings
Illustration 4: IP Settings
Illustration 5: DHCP Reservations
IP Settings
LAN Interface
To configure the LAN interface’s IP address and subnet mask.
DHCP Server
To configure and enable the built-in DHCP server or not. If enabled, the IP address
range can be configured. Configure DHCP Reservation if there is a need to assign a
specific IP address to a specific MAC address using DHCP.