User's Manual
Table Of Contents
- User Manual
- Table of Contents
- 1 Copyright
- 2 Disclaimer
- 3 Product Description
- 4 Using the Pepwave Devices
- 5 CPE Settings Details
- 6 Port Forwarding
- 7 QoS
- 8 Firmware Upgrade
- 9 Debug and System information
- 10 Restore to Default Settings
- Appendix
- Table of Contents
http://www.pepwave.com 12 Copyright © 2011 Pepwave
User Manual
Pepwave PolePoint Series
Illustration 2: Pepwave Surf Setup Page
In the field SSID under Wireless Settings, input the access point’s SSID (sometimes it is called the
“network name”). According to the setting of the Access Point you are associating to, you may choose a
different Authentication setting.
If Static WEP key or WPA/WPA2-Personal is selected for Authentication, input the Encryption Key field
as well. (There are also options of 802.1x with dynamic WEP key and WPA/WPA2-
Personal/Enterprise. You do not need to use these settings unless instructed to do so by your ISP.)
Click the Save button at the bottom to complete.
You can now click the Connect link on the top bar and then click the Connect button to associate with
the access point.