User's Manual
Table Of Contents
- Copyright
- Disclaimer
- Product Description
- Using the Pepwave Devices
- Appendix:
- Federal Communication Commission Interference Statement
Pismolabs 101 mini
- 5 -
Copyright © 2009 Pepwave
Pismolabs 101 mini User Manual
3.2 Hardware Setup
3.2.1 Pismolabs 101 mini
1. Attach the provided antenna to the left most antenna connector
2. Connect the LAN port to the computer’s Ethernet port with an Ethernet cable.
3. Connect the end of the included power adapter to the power socket on Pismolabs
101 mini.
4. Power on the power adaptor.