User's Manual
Table Of Contents
- Copyright
- Disclaimer
- Product Description
- Using the Pepwave Devices
- Appendix:
- Federal Communication Commission Interference Statement
Pismolabs 101 mini
- 23 -
Copyright © 2009 Pepwave
Pismolabs 101 mini User Manual
4.7 QoS
QoS, in long is Quality of Service, refers to resource reservation control mechanisms. By
custom this option, you may select a specific traffic from a source or to a target to have
higher priority than the others, thus to have a higher and better performance than the
others.
QoS Settings
Target
To choose whether it is an incoming (Source) or outgoing
(Destination) traffic that should be controlled by the service.
Service Port
Range
Enter a port or a range of ports that would like to be controlled by the
service.
Protocol
The Protocol for the above port(s). You should select at least one
protocol between TCP and UDP.
IP Address
The IP address that you would like the traffics to be controlled by the
service.
Priority
There are three choices for service priority: Background, Video and
Voice. By choosing Default, priority will be automatically adjusted.
Del
By clicking the button, you can delete the corresponding rows of port
forwarding rules.