User's Manual

PePWave Mesh Connector Series

PePWave Mesh Connector Series User Manual

4.4.2 Access Point configure Manually

Illustration 10: Access Point Configure Manually

In Manual Configuration mode, the SSID is manually entered.

Authentication can be one of three configurable values:

 Open

For Open Authentication Mode, no Encryption Key is necessary.

 Static WEP Key

For Static WEP Key Authentication Mode, a 64- or 128-bit Encryption Key is

required, and can be entered in either an ASCII or HEX representation.

 WPA/WPA2-Personal

For WPA/WPA2-Personal Authentication Mode, an Encryption Key, of at least 8

characters, is required.

• WPA/WPA2-Enterprise (Applicable to Mesh Connector only)

For WPA/WPA2-Enterprise Authentication Mode, the Radius server specified by

this setting will be used.