User's Manual

Pepwave MAX and Surf User Manual

http://www.pepwave.com

14 Outbound Policy Management

Pepwave routerscan flexibly manage and load balance outbound traffic among WAN

connections.

Important Note

Outbound policy is applied only when more than one WAN connection is active.

The settings for managing and load balancing outbound traffic are located at

Advanced>Outbound Policy or Advanced>PepVPN, depending on model.

Outbound policies for managing and load balancing outbound traffic are located at

Network>Outbound Policy> or Advanced>PepVPN>Outbound Policy.

14.1 Outbound Policy

There are three main selections for the outbound traffic policy:

 High Application Compatibility

 Normal Application Compatibility

 Custom

Note that some Pepwave routers provide only the Send All Traffic To setting here. See

Section 12.1 for details.

Outbound Policy Settings

High

Outbound traffic from a source LAN device is routed through the same WAN connection

regardless of the destination Internet IP address and protocol. This option provides the