User's Manual

Pepwave MAX and Surf User Manual
http://www.pepwave.com
76
Copyright @ 2015 Pepwave
PepVPN Local ID
The local ID is a text string (254 characters maximum length) to identify this local unit when establishing a VPN
connection. When creating a profile on a remote unit, this local ID must be entered in the remote unit's Remote ID
field. Click the icon to edit Local ID.
PepVPN Settings
1.1.1.2 Handshake Port
A
1.1.1.3 To designate a custom
handshake port (TCP), click the
custom radio button and enter
the port number you wish to
designate.
Link Failure Detection Time
The bonded VPN can detect routing failures on the path
between two sites over each WAN connection. Failed
WAN connections will not be used to route VPN
traffic. Health check packets are sent to the remote unit to
detect any failure. The more frequently checks are sent,
the shorter the detection time, although more bandwidth
will be consumed.
When Recommended (default) is selected, a health
check packet is sent every five seconds, and the expected
detection time is 15 seconds.
When Fast is selected, a health check packet is sent
every three seconds, and the expected detection time is
six seconds.
When Faster is selected, a health check packet is sent
every second, and the expected detection time is two
seconds.
When Extreme is selected, a health check packet is sent
every 0.1 second, and the expected detection time is less
than one second.
A
- Advanced feature, please click the button on the top right-hand corner to activate.